More drilling ... the chassis is now resembling a colander!

Sunday 18th October - Work time = 4 hrs ... Build Time To Date = 6 hrs
I decided I would trial fit all the panels and drill the holes ready for final fitting before I secured any of the panels.  This allows me full access for the clamps and drilling.  So today I drilled holes for the offside inner tunnel, front bulk heads and inner front bulk heads.  Lots of panels required some "dremmel fetteling" but apart from that no issues. 
Here is the fibre glass inner bulk head with clutch foot rest moulding.

So 6 hours in and all I have managed to do is drill the chassis full of holes and I am still to trial fit the scuttle and exterior side panels.